| Appearance / Physical State | Liquid |
|---|---|
| Odor | Mild. Sweet. Pungent |
| Flash Point | 31.0 °F (-0.6 °C) |
| Boiling Point / Range | 131 – 316 °F (55 – 157.78 °C) |
| Evaporation Rate | > 1 (BuAc = 1) |
| Vapor Density | > 1 (Air = 1) |
| Handling | Do not handle, store or open near an open flame, sources of heat or sources of ignition. Protect material from direct sunlight. When using do not smoke. Explosion-proof general and local exhaust ventilation. Take precautionary measures against static discharges. All equipment used when handling the product must be grounded. Use non-sparking tools and explosion-proof equipment. Do not get this material in contact with eyes. Avoid inhalation of vapors and spray mists. Avoid prolonged exposure. Use only outdoors or in a wellventilated area. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. |
| Storage | Store locked up. Keep away from heat, sparks and open flame. Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out of direct sunlight. Store in original tightly closed container. Store in a well-ventilated place. Keep in an area equipped with sprinklers. Store away from incompatible materials (see Section 10 of the SDS). |
| Disposal | Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose of contents/container in accordance with local/regional/national/international regulations. |
| Features | – Precision rolling ball, stainless steel tip. |
| Materials | Safe on most surfaces |
TEXPEN® Textile Marker
Adventageous for its ultra high capacity, the TEXPEN® Textile Marker provides a bright, sharp, rapid-drying permanent mark on synthetic and synthetic/cotton blended fabrics.
WHITE
- Marker Tip : fine, steel
- Units/Case : 48
- Part # : 13080
BLACK
- Marker Tip : fine, steel
- Units/Case : 48
- Part # : 13030
YELLOW
- Marker Tip : fine, steel
- Units/Case : 48
- Part # : 13060








Reviews
There are no reviews yet.